banner



how to draw a dragon head easy

Download Article

Download Article

Cartoon a dragon is a peachy manner to bear witness your creativity, merely information technology may be challenging to draw the head considering it has a lot of detail. Luckily, you tin first sketching the head with basic shapes before adding in the features. Fantasy dragons usually accept pointier snouts and are the most mutual types in Western civilization, while Chinese dragons have boxier heads. With a fleck of practice, you'll exist able to draw any blazon of dragon head y'all desire!

  1. i

    Draw a circle in the heart of your newspaper. Apply a pencil and sketch your lines in lightly so you're able to erase them hands. Brand the circle in the center of the page, leaving room on each side of it and then you have infinite to add together more features. The circle doesn't need to be perfectly circular, just you may use a compass to help y'all draw your lines if yous want.[one]

    • The drawing of the dragon caput will be in profile view when you're finished.
    • If you lot plan on adding the residue of the dragon's body to your drawing, then make sure the circle is small enough so you tin fit the torso on your sheet of newspaper.
    • If you want your dragon to take a longer face, then make a horizontal oval instead of a circle.
  2. 2

    Add together a rounded trapezoid on the side of your circle for the dragon's snout. Choose either the left or right side of the circle depending on which way you lot desire the dragon caput to face. Draw the top horizontal line of the snout coming from the pinnacle of the circumvolve so it's the aforementioned length as the circle's diameter. Brand another horizontal line coming from the lesser of the circle to make the bottom of the snout. Connect the 2 lines so the corners are rounded.[2]

    • You tin brand the snout longer or shorter depending on how y'all want the dragon to await.
    • Don't leave abrupt corners on the terminate of the snout or else your dragon won't expect natural.

    Advertisement

  3. 3

    Make parallel lines coming out the bottom of the circle for the dragon's neck. Kickoff 1 of the lines where the bottom of the snout connects to the head. Make a curved line coming down from the head equally long as you want it. Then describe some other curved line that's parallel to the showtime one on the reverse side of the head.[iii]

    • The dragon's neck usually gets wider closer to its trunk, and so you can make the lines get further autonomously most the bottom if you want to.

    Tip: Add a cervix even if you don't plan on drawing the rest of the dragon's body. That way, the head will yet accept the illusion that it's connected to something.

  4. 4

    Sketch a curved horizontal line through the trapezoid to make a mouth. Start drawing the mouth in the middle of the trapezoid's narrow end. Extend the line horizontally so information technology ends near the heart of the dragon's head. Curve the finish of the mouth upward if you want your dragon to look like it'due south smile, or bending it downwardly if you want it to frown.[4]

    • Put a parallel line underneath the mouth if you lot desire information technology to look like your dragon has a bottom lip.
  5. 5

    Draw triangles coming out from the mouth to give your dragon teeth. You lot can either add teeth that betoken upwardly or down forth your dragon'southward mouth. Choose anywhere along the mouth and draw a triangle that points up or downward starting from the rima oris line. Add 5-6 separate teeth in your dragon's mouth so it looks more fearsome.[5]

    • Don't line the entire mouth with teeth or else your cartoon may start to await messy.
    • You can have teeth pointing both upwardly and downward.
  6. vi

    Put a circle or triangle to a higher place the mouth to make an eye. Place the centre next to where the top of the snout connects to the side of the circumvolve. If yous want your dragon to look more realistic, draw a small circle for the eye so in that location'south a small gap between information technology and the tiptop of the snout. For a dragon that looks angrier, add a horizontal triangle so the bespeak faces the snout.[6]

    • Don't make the heart as well large or else y'all won't have room to add together other features.
    • Search for pictures of other reptiles to run across what their eyes look like and then you can utilize them as a reference.
  7. 7

    Add bumps and ridges on the elevation of the dragon's head for more texture. Dragons don't have smooth peel, so their heads will look bumpy and knobby from their scales. Use the outlines yous currently accept every bit guides and become over them to add curves to the snout. Utilise wavy or zig-zag lines going from the end of the snout toward the back of its caput.[seven]

    • For example, you may add together a large bump to a higher place the dragon's eye if yous want to give it a prominent brow.
    • You tin add as many or equally few bumps and ridges to the dragon depending on how you want it to wait.
  8. 8

    Give your dragon horns if you desire to. If you lot want to add horns to your dragon, make a vertical line extending out from the superlative of the dragon's head. Extend the line out then it's about the same length as the snout. Add together another line that starts on the back side of the dragon's head and connects to the stop of the start line to complete the horn.[viii]

    • Make the horn shorter if you want to brand it seem like your dragon is younger.
    • You can make the horns whatsoever shape you want. Look up horns on existent animals to get influences for what you can include on your dragon.
    • You lot may also choose to add horns or spikes running down the back of the dragon'southward neck if yous want to.
  9. nine

    Erase the lines you used as guides. Get over your drawing with an eraser and go rid of whatsoever lines that aren't nevertheless a part of your dragon. For instance, you may erase the circumvolve or the original outline of the snout if yous added more than bumps to it. Continue erasing any guides or mistakes you made, and blow off the shavings when you're finished.[ix]

    • Darker lines will be harder to erase than lightly sketched lines.
    • Get a clickable detail eraser if you need to erase lines in small areas. You can become special erasers from an fine art store or online.
  10. 10

    Add details like scales and nostrils to make your dragon seem realistic. Once you erase the guide lines, offset adding the final details into your drawing. Start with small ovals or circles for the nostrils at the finish of the snout. In one case y'all add together the nostrils, draw in U-shaped lines on the sides of the dragon's head and downward its neck give the illusion of scales.[ten]

    • You don't need to describe every calibration on the dragon's face since it could make your drawing wait messy or unclear.
    • Shade your drawing with a pencil or colored pencil if you want to add more perspective or color.
  11. 11

    Finished.

    Advertisement

  1. 1

    Make a circle with a rounded rectangle for the dragon'south caput and snout. Outset by making a circle in the middle of your piece of paper then you lot have room to add together features on each side. Choose the right or left side of the circle to put the snout depending on what direction you want the dragon to face. Start the rectangle halfway downwards from the top of the circle and connect the bottom edge to the lowest point of the circle.[11]

    • You lot tin can choose to make the dragon's snout thicker if you want.
    • When yous're finished, your dragon head will be in contour view.
    • Sketch your lines lightly at first so you can easily erase them afterward on. Otherwise, you lot'll go out marks on the newspaper that you can't get rid of.
  2. 2

    Sketch in the dragon'southward neck coming out from the other side of the caput. Starting time a line at the betoken where the bottom of the snout touches the circumvolve. Bend the line slightly down so it looks like information technology extends off of the page. Draw the superlative of the neck coming from the summit side of the circle then information technology's parallel with the starting time line yous drew.[12]

    • While you don't have to draw the neck for your dragon, it adds to the illusion that the head is connected to a body.
    • Chinese dragons have long, snake-like bodies, so the neck will stay the same thickness the entire time.
  3. 3

    Draw a horizontal line and triangles to give your dragon a mouth and teeth. Start the line for the mouth so it'south a third of the manner up from the bottom of the rectangle. Make a slightly curved horizontal line that ends near the centre of the dragon'due south head. Draw small triangles coming out from the top or bottom of the line to requite the dragon sharp teeth.[13]

    • Give your dragon a smile if y'all desire it to look happy or a frown if you want it to appear more fierce.
    • Only add together a few teeth to the rima oris so the drawing doesn't look messy.
  4. 4

    Add a circle or oval above the mouth for your dragon's eye. Place the eye for your dragon inside the circle then it's next to where the top of the snout connects to the head. Make a circle or a horizontal oval for the eye so there's a small-scale gap between it and the top of the caput. Add an angled line above the middle to requite your dragon an angry forehead.[14]

    • The dragon's pupil can exist round like a human, or yous can make it look similar a slit, like to a serpent or cat.
    • Don't make the eye too big or else the dragon will look unnatural and you won't accept room to identify the rest of the features.
  5. five

    Describe antlers or horns on top of your dragon's head. Chinese dragons usually accept antlers that look like a deer, just they tin besides have standard spiked horns. If you want to add antlers, Draw a Y-shape coming out from the dorsum of the dragon's caput. Add lines on either side of the Y-shape and so the antler ends in curved points. If you want to brand horns, draw a long triangle coming out from the dorsum of the dragon's caput instead.[fifteen]

    • Yous don't demand to add antlers or horns at all if you don't desire to.
  6. 6

    Sketch in ears underneath the antlers. Different many other dragons, Chinese dragons have ears on the sides of their head that look similar to cow or deer ears. Depict a curved line coming out from the side of the dragon's head and extend it so information technology'due south about half as long as the head's diameter. Add another curved line underneath the first i and connect the ends to make the ear.[16]

    • You don't need to draw the ear on the other side of the head since you wouldn't be able to see it from this perspective.
  7. vii

    Requite your dragon a beard and mane. Chinese dragons accept hair and manes effectually their heads that resemble a lion. Put in wavy lines that stop in points around the bottom of the snout and the back of the head. Draw the hair in tufts rather than adding the private strands so your cartoon doesn't go muddled.[17]

    • The mane will go backside your dragon's horns or antlers if information technology has them.
    • You tin make the pilus as long or short every bit you lot want.
  8. viii

    Erase the guide lines that aren't a function of your dragon'due south head. Employ the eraser on your pencil or a block eraser to clean up the lines on your drawing. Erase whatsoever of the lines that y'all were using as guides, such as the sides of the circle or parts that are overlapped by hair. Go on getting rid of lines you don't demand in your drawing anymore and blow the shavings off when you lot're done.[18]

    Warning: Don't wipe the drawing with your hand when you're done erasing your lines since you could easily smudge the pencil.

  9. ix

    Add nostrils and whiskers to the snout. Put in small-scale circles or ovals near the front of the snout for your dragon's nostrils. Leave a small gap beside the nostril before drawing a long wavy line that ends well-nigh the back of the dragon'due south caput. Make another parallel wavy line directly underneath the showtime ane and connect the ends to add the whisker.[19]

    • Depict pocket-size smoke clouds coming out from the dragon'due south nostrils if you want to make it seem like it'southward about to breath fire.
    • Shade your drawing with your pencil to make information technology look more realistic and add together perspective.
    • Use colored pencils if you want your dragon to look more than colorful.
  10. 10

    Finished.

    Advertizing

Add New Question

  • Question

    Why would I endeavor shading the drawing rather than redoing the colour?

    Community Answer

    Shading makes the art look more than real. Redoing the color makes it expect more than like a drawing.

  • Question

    What if this is difficult for me?

    Jacquelyn Helmuth

    Jacquelyn Helmuth

    Customs Answer

    Try sketching it lightly and use the picture of the dragon you want to draw. And so, lightly draw what yous meet and, if you happen to get the shape you want, depict a little darker. With practice, yous will meliorate.

  • Question

    How do y'all make ballsy scenes with dragons that POP out at you?

    Community Answer

    Use dramatic shading. For case, if your dragon is facing slightly left, add together shading under its chin, forth its neck, at the left end of its eyes, and at the base of its horns.

  • Question

    How do I draw a dragon'southward middle?

    Community Answer

    Depict a more than rounded outline than that of a man, more like a cat's heart. Give the eye a sparse, curved educatee. Add shading to suggest a colored iris and environment the middle with scales.

  • Question

    What would be a good background for a dragon?

    Tokayyoshi

    If it'south a fire-breathing dragon, add flames! If your dragon lives in the body of water, draw fish, coral, and bubbles.

  • Question

    How tin I make a drawn dragon appear lifelike?

    Community Answer

    Add lots of shading, i.east., describe where the lighting would testify.

  • Question

    I could non draw these without running into a problem. Is in that location an easier way?

    Community Answer

    Information technology depends on your level of power. If you want simpler processes, you tin can outset with easier dragons and build upward from there.

  • Question

    How would I draw a frill?

    Community Answer

    Frills expect like smaller versions of wings that are attached to the head. Just expect at fly references and size them downwardly. If you need a amend visual, tissues and pipe cleaners will assistance you get the positioning right.

  • Question

    Is there a simpler mode to draw the dragon's horns?

    Community Answer

    You lot can make two wavy lines that connect at the top and form a point, and if that doesn't piece of work, you can make a stretched triangle with some overlapping pare at the base.

  • Question

    How do I draw a cavern for my dragon?

    Community Answer

    You can draw a cave past drawing a rocky circle and adding shading in the groundwork, darkening as you lot go deeper. Attempt to make the cavern walls uneven, and if you want, add together some hanging rocks, rocks hugging the cave wall, etc. Greyness or brown would be expert default colors, but you can add multiple colors if yous want to include glowing jewels and gems.

See more answers

Ask a Question

200 characters left

Include your email address to go a message when this question is answered.

Submit

Advertisement

Video

  • Use pictures of other animals for reference if you want to make your dragon more than unique or add unique features. For example, you lot tin can give your dragon a beak like a turtle or a

Thanks for submitting a tip for review!

Advertizing

Things You'll Demand

  • Paper
  • Pencils
  • Eraser
  • Colored pencils (optional)

About This Article

Article Summary X

To describe a dragon head using shapes, outset by drawing 2 circles shut together to make the eyes. So, depict 2 wedge-like shapes for the snout, and sketch the neck using long, curvy lines, similar to the image of a snake. Side by side, utilize triangles and trapezoids to shape the back of the caput, and depict cones and mounds to represent parts like the horns or locks of hair. Afterwards, refine the lines and add details such as fins and spikes. Finally, erase any unnecessary lines and color your dragon as desired. To learn more, including how to draw a dragon head using animal references like goats and crocodiles, read on.

Did this summary help y'all?

Thanks to all authors for creating a folio that has been read 556,482 times.

Did this article assistance you?

Source: https://www.wikihow.com/Draw-a-Dragon-Head

Posted by: pepperhisday.blogspot.com

0 Response to "how to draw a dragon head easy"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel